铁－铜－锰氧化物／海泡石催化剂对苯羟基化为苯酚的催化作用

铁－铜－锰氧化物／海泡石催化剂对苯羟基化为苯酚的催化作用曹声春，黄孟光，李克，杜兴军（湖南大学化工系，长沙４１００８２）关键词氧化铁，氧化钢，二氧化锰，海泡石，负载型催化剂，苯，羟基化，苯酚由苯合成苯酚的现行方法存在着反应步骤多，工艺过程复杂，总转化...     

含铈类水滑石的制备及其衍生物催化研究

采用共沉淀水热法制备了镍铝铈三元复合层状氢氧化物.详细探讨了合成体系pH值、Ce/Al比及陈化条件对合成产物物相的影响;通过XRD,ICP,TG-DTA手段研究了合成物物相、组成及热行为.考察了以合成物为前驱体经焙烧后转化为镍铝铈复合金属氧化物在催化消除NO反应中的应用.实验结果表明,合成镍铝铈三元复合层状氢氧化物的适宜条件是:M2 /M3 =2,Ce/Al=0.07～0.75,pH=5.5～6.9,水热处理条件为110℃,5 h;在pH=5.5～6.9条件下,合成原料配比不同,产物物相相同,但组成不同;合成物热稳定性较差,在T=100～400℃之间,层间吸附水及层间平衡阴离子NO3-脱去,转化为复合氧化物,将此氧化物应用于NO消除反应中,表现出高的低温活性,400℃进行反应,NO转化率达95%,N2选择性几乎100%.     

Stable, reproducible nanorecording on rotaxane thin films

Stable, reversible conductance transitions and memory effects were observed in solid-state rotaxane-based Langmuir-Blodgett (LB) thin films. Taking advantage of the switching property, we have achieved reproducible nanometer-scale recording dots on rotaxane LB films via voltage application using a scanning tunneling microscope probe. The stable and easily controlled conductance switching makes the rotaxanes a hopeful candidate for nanorecording.     

Mixed ligand system of cysteine and thioglycolic acid assisting in the synthesis of highly luminescent water-soluble CdTe nanorods

Highly luminescent water-soluble CdTe nanorods were prepared with the assistance of the mixed ligand system of cysteine and thioglycolic acid; the aspect ratio and photoluminescence of the CdTe nanorods could be controlled by the refluxing time.     

高碲酸合铜（Ⅱ,Ⅲ）配合物的合成和性质

在Ｈ６ＴｅＯ６／ＫＯＨ水溶液中以臭氧为氧化剂，将二价铜化合物氧化成三价铜化合物，并获得一个新的三价铜化合物Ｂａ４Ｋ［Ｃｕ（Ｈ２ＴｅＯ６）２］（ＯＨ）４．６Ｈ２Ｏ；描述了碱性溶液中“Ｃｕ（Ⅲ）／Ｃｕ（Ⅲ）”循环伏安图。对铜（Ⅲ）化合物，Ｎａ４Ｈ［Ｈ２ＴｅＯ６）２］．１７Ｈ２Ｏ以及相应的铜（Ⅱ）配合物的电子光谱和Ｃｕ２ｐＸＰＳ进行了研究，给出了其配位场场强参数和Ｃｕ２ＰＸＰＸ的电子结合能。由于价态升高     

Ultraviolet photolysis of CH2I2 in methanol: O-H insertion and HI elimination reactions to form a dimethoxymethane product

Ultraviolet photolysis of low concentrations of CH2I2 in methanol solution found that CH2I2 is converted into dimethoxymethane and some H+ and I- products. Picosecond time-resolved resonance Raman (ps-TR3) experiments observed that the isodiiodomethane (CH2I-I) photoproduct decayed faster as the concentration of methanol increases, suggesting that isodiiodomethane is reacting with methanol. Ab initio calculations indicate isodiiodomethane is able to react with methanol via an O-H insertion/HI elimination to form an iodoether (ICH2-O-CH3) and HI products. The iodoether can then further react via another O-H insertion/HI elimination reaction to form the dimethoxymethane (CH3-O-CH2-O-CH3) observed in the photochemistry experiments. A reaction mechanism consistent with these experimental and theoretical observations is proposed.     

Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.     

Studies on the Spectral Behavior between Protein with Poniacyl Carmine 2B and its Analytical Application

In this paper, the spectral behavior of protein and Poniacyl Carmine 2B (PC 2B) has been studied by spectrophotometric method. The conditional constants, apparent combination constant K and maximum binding number n, were used to express the combination ability of the reactions between PC 2B and protein under a set of given conditions. The Sandell index s was used to express the sensitivity of the determination of protein. The factors, acidity, PC 2B concentration and the ionic strength, were discussed by the change of apparent combination constant and maximum binding number. It was found that acidity of the solution, PC 2B concentration and ionic strength had a significant effect on the sensitivity of the assay of protein. Under the optimal conditions, the apparent combination constant K and the maximum binding number n were 2.36 × 10⁶ L mol^?1 and 95, respectively. With further investigation, it was found that the Scatchard model was suitable in treating the data obtained in the experiments. In the buffer medium of HCl‐KCl at 1.87, the addition of protein made the maximum absorption of the system move from 527 nm to 513 nm. Its apparent molar absorptivity is 4.46 × 10⁵ Lmol^?1 cm^?1 at 513 nm. Beer's law is obeyed in the range of 0 ? 55 μg mL^?1. The system developed in this paper has been used for the determination of protein in milk powder successfully.